Files
diskless-workstation/files/dracut/95dot1x-macsec/module-setup.sh
T
2026-06-17 13:40:28 +00:00

85 lines
4.1 KiB
Bash
Executable File

#!/bin/bash
# 95dot1x-macsec: authenticate the port with 802.1X EAP-TLS (TPM-held key,
# client cert in TPM NV) and bring up MACsec before netroot is mounted.
# The supplicant is launched as a systemd "root storage daemon"
# (argv[0] = @wpa_supplicant) so it survives switch-root and keeps the
# MKA session — and therefore the link carrying the root fs — alive.
check() {
require_binaries wpa_supplicant wpa_cli tpm2_nvread openssl || return 1
return 0
}
depends() {
# network-manager (not network-legacy): NM renews the DHCP lease in the real
# root after switch-root (the legacy one-shot lease was never renewed). The
# secure path drives DHCP on macsec0 via nmcli instead of the old `ifup`.
echo "network-manager bash"
return 0
}
installkernel() {
instmods macsec
# tpm_crb/tpm_tis are usually built in; assert anyway
instmods tpm_crb tpm_tis
}
install() {
# wpa stack + tpm + openssl, plus the coreutils the hook calls. dracut on
# RHEL only bundles binaries a module requests — head/ls/grep/etc. are NOT
# present by default, so list everything the hook uses.
# nvme: the rd.dot1x=0 test path drives `nvme connect-all` itself (this
# distro's dracut nvmf module populates discovery.conf but never registers
# an initqueue/online autoconnect hook). The nvmf module installs nvme too,
# but list it here so the hook's dependency is explicit and load-order-safe.
# nmcli: the secure path brings macsec0 up via NetworkManager (DHCP+renewal)
# instead of the old network-legacy `ifup`.
inst_multiple wpa_supplicant wpa_cli tpm2_nvread openssl ip setsid nmcli \
grep sed cut tr sha256sum sleep mkdir nvme
# TSS libraries that tpm2_nvread dlopens
inst_libdir_file "libtss2-*"
# Fleet-generic supplicant config + RADIUS CA
inst_simple /etc/dot1x/wpa_supplicant-dot1x.conf /etc/dot1x/wpa_supplicant-dot1x.conf
inst_simple /etc/dot1x/radius-ca.pem /etc/dot1x/radius-ca.pem
# cmdline-stage hook (runs BEFORE NetworkManager starts): in secure mode it
# drops /run/NetworkManager/conf.d/10-dot1x-unmanaged.conf so NM never grabs
# the physical EAPOL NIC (wpa_supplicant owns it). No-op in rd.dot1x=0 test
# mode, so NM manages+renews the boot NIC. Replaces the old static
# 99-dot1x-unmanaged.conf, which couldn't be mode-aware.
inst_hook cmdline 10 "$moddir/nm-unmanaged.sh"
# Hook: runs from the initqueue once the NIC exists, before netroot
inst_hook initqueue/settled 30 "$moddir/dot1x-macsec-up.sh"
# Test-mode (rd.dot1x=0) NVMe-oF connect as a systemd unit. This initramfs
# is systemd-driven and does NOT source dracut initqueue/online hooks when
# the ip=dhcp link comes up (verified: the hook installs but never fires),
# and the nvmf module registers no autoconnect — so a dracut hook never
# runs. A oneshot unit ordered Before=initrd-root-device.target, with its
# own wait-for-network + connect loop, connects the namespace
# deterministically. ConditionKernelCommandLine=rd.dot1x=0 makes it a no-op
# on the secure path.
inst_simple "$moddir/nvmf-connect.sh" /usr/sbin/nvmf-connect
# systemdsystemunitdir is normally /usr/lib/systemd/system, but dracut does
# not reliably export it into module-setup context here — when empty,
# inst_simple's dir handling silently DROPS the unit (the bug that left the
# initramfs without nvmf-connect.service). Fall back to the canonical path.
local _unitdir="${systemdsystemunitdir:-/usr/lib/systemd/system}"
inst_simple "$moddir/nvmf-connect.service" "${_unitdir}/nvmf-connect.service"
mkdir -p "${initdir}${_unitdir}/initrd-root-device.target.wants"
ln -sf ../nvmf-connect.service \
"${initdir}${_unitdir}/initrd-root-device.target.wants/nvmf-connect.service"
# Hard-fail the dracut build if the unit didn't land — never ship a UKI that
# silently can't connect its NVMe-oF root in test mode.
if [ ! -e "${initdir}${_unitdir}/nvmf-connect.service" ]; then
derror "95dot1x-macsec: nvmf-connect.service not installed into ${_unitdir}"
return 1
fi
dracut_need_initqueue
}