145 lines
6.7 KiB
Bash
Executable File
145 lines
6.7 KiB
Bash
Executable File
#!/bin/bash
|
|
# dot1x-macsec-up.sh — initqueue/settled hook.
|
|
# Order of operations is load-bearing:
|
|
# 1. pull client cert from TPM NV into /run
|
|
# 2. start wpa_supplicant (argv[0]=@wpa_supplicant => survives switch-root)
|
|
# 3. wait for EAP success + macsec0
|
|
# 4. DHCP on macsec0 (the pre-auth lease, if any, is invalid post-auth/VLAN)
|
|
# 5. derive hostnqn/hostid from the cert so dracut's nvmf module can
|
|
# connect the NVMe/TCP root namespace over macsec0
|
|
# Idempotent: guarded by a stamp file because initqueue may re-run hooks.
|
|
|
|
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
|
|
|
|
STAMP=/run/dot1x/.done
|
|
[ -e "$STAMP" ] && exit 0
|
|
mkdir -p /run/dot1x /run/wpa_supplicant
|
|
|
|
# --- knobs (override on the kernel cmdline) ---------------------------------
|
|
NIC=$(getarg rd.dot1x.if=)
|
|
if [ -z "$NIC" ]; then
|
|
# First non-loopback, non-macsec interface. Pure shell — ls/grep/head are
|
|
# not guaranteed to exist in the initramfs.
|
|
for _dev in /sys/class/net/*; do
|
|
_name=${_dev##*/}
|
|
case "$_name" in lo|macsec*) continue ;; esac
|
|
NIC=$_name; break
|
|
done
|
|
fi
|
|
NVINDEX=$(getarg rd.dot1x.nvindex=); [ -n "$NVINDEX" ] || NVINDEX=0x01800001
|
|
TIMEOUT=$(getarg rd.dot1x.timeout=); [ -n "$TIMEOUT" ] || TIMEOUT=60
|
|
|
|
info "dot1x-macsec: using interface $NIC, NV index $NVINDEX"
|
|
|
|
# --- 0. TEMPORARY test bypass (rd.dot1x=0) ----------------------------------
|
|
# Disables 802.1X + MACsec so the UKI / rootfs / NVMe-oF boot path can be
|
|
# validated on an OPEN switch port before the auth layer is brought online.
|
|
# The physical NIC is brought up with DHCP directly and dracut's cmdline-driven
|
|
# nvmf module connects the root namespace over it — there is no macsec0, no
|
|
# supplicant, no TPM cert read. The rest of the boot (rd.nvmf.discover, verity,
|
|
# systemd.volatile=overlay) is unchanged because it is driven by the kernel
|
|
# cmdline, not by this hook. SECURITY: no link auth or encryption in this mode — lab/test
|
|
# networks only. Remove rd.dot1x=0 from the cmdline to restore full security.
|
|
if [ "$(getarg rd.dot1x=)" = "0" ]; then
|
|
warn "dot1x-macsec: 802.1X/MACsec DISABLED (rd.dot1x=0) — TEST MODE, no link security"
|
|
# Networking in test mode is owned ENTIRELY by `ip=dhcp` on the cmdline:
|
|
# dracut's network module brings the NIC up, gets a lease and writes
|
|
# resolv.conf. Do NOT `ifup`/`ip link set up` the NIC here — a second
|
|
# configuration races dracut's own ("Error: ipv4: Address already
|
|
# assigned"). (The secure path below is different: there the hook owns
|
|
# macsec0, which dracut knows nothing about, so it must address it itself.)
|
|
#
|
|
# Static test NVMe identity (the secure path derives this from the TPM
|
|
# cert). SPDK serves "allow any host", so this is cosmetic here, but keep it
|
|
# so the target can host-filter if desired.
|
|
if [ ! -s /etc/nvme/hostnqn ]; then
|
|
mkdir -p /etc/nvme
|
|
echo "nqn.2026-06.org.example.fleet:test-host" > /etc/nvme/hostnqn
|
|
echo "11111111-1111-1111-1111-111111111111" > /etc/nvme/hostid
|
|
info "dot1x-macsec: test hostnqn $(cat /etc/nvme/hostnqn)"
|
|
fi
|
|
|
|
# Drive the NVMe-oF connect ourselves. This distro's dracut `nvmf` module
|
|
# parses rd.nvmf.discover into /etc/nvme/discovery.conf but registers NO
|
|
# initqueue/online autoconnect hook (that hook dir is empty), so
|
|
# `nvme connect-all` is never run, the root namespace never appears, and the
|
|
# boot spins on /dev/mapper/root forever. Queue connect-all on the main
|
|
# initqueue so it retries each loop until the namespace shows up (the link
|
|
# is already up via ip=dhcp; connect-all is idempotent once connected).
|
|
_disc=$(getarg rd.nvmf.discover=) # e.g. tcp,192.168.50.10,4420
|
|
if [ -n "$_disc" ]; then
|
|
_trtype=${_disc%%,*} # tcp
|
|
_rest=${_disc#*,} # 192.168.50.10,4420
|
|
_traddr=${_rest%%,*} # 192.168.50.10
|
|
_trsvcid=${_rest##*,} # 4420
|
|
info "dot1x-macsec: queueing nvme connect-all ${_trtype}/${_traddr}/${_trsvcid}"
|
|
/sbin/initqueue --unique --name nvmf-connect-all \
|
|
nvme connect-all -t "$_trtype" -a "$_traddr" -s "$_trsvcid"
|
|
else
|
|
warn "dot1x-macsec: rd.nvmf.discover not set — cannot connect NVMe root"
|
|
fi
|
|
: > "$STAMP"
|
|
exit 0
|
|
fi
|
|
|
|
# --- 1. client certificate out of TPM NV ------------------------------------
|
|
if [ ! -s /run/dot1x/client.pem ]; then
|
|
if ! tpm2_nvread -T device:/dev/tpmrm0 "$NVINDEX" -o /run/dot1x/client.der; then
|
|
warn "dot1x-macsec: tpm2_nvread failed — cannot authenticate"
|
|
exit 1
|
|
fi
|
|
openssl x509 -inform DER -in /run/dot1x/client.der -out /run/dot1x/client.pem
|
|
fi
|
|
|
|
# --- 2. supplicant as a root storage daemon ---------------------------------
|
|
ip link set "$NIC" up
|
|
if [ ! -e /run/dot1x/wpa.pid ]; then
|
|
# bash exec -a sets argv[0]; '@' prefix tells systemd's switch-root
|
|
# killing spree to spare this process (root storage daemon convention).
|
|
setsid bash -c "exec -a @wpa_supplicant /usr/sbin/wpa_supplicant \
|
|
-Dmacsec_linux -i $NIC \
|
|
-c /etc/dot1x/wpa_supplicant-dot1x.conf \
|
|
-P /run/dot1x/wpa.pid" &
|
|
fi
|
|
|
|
# --- 3. wait for authentication + macsec0 -----------------------------------
|
|
i=0
|
|
while [ "$i" -lt "$TIMEOUT" ]; do
|
|
if wpa_cli -p /run/wpa_supplicant -i "$NIC" status 2>/dev/null \
|
|
| grep -q '^suppPortStatus=Authorized' \
|
|
&& ip link show macsec0 >/dev/null 2>&1; then
|
|
break
|
|
fi
|
|
sleep 1; i=$((i + 1))
|
|
done
|
|
if [ "$i" -ge "$TIMEOUT" ]; then
|
|
warn "dot1x-macsec: authentication / MACsec timeout after ${TIMEOUT}s"
|
|
exit 1
|
|
fi
|
|
info "dot1x-macsec: port authorized, macsec0 up after ${i}s"
|
|
|
|
# --- 4. address the secure interface; netroot rides on macsec0 --------------
|
|
ip link set macsec0 up
|
|
# Hand macsec0 to dracut's network stack for DHCP + netroot resolution
|
|
ifup macsec0
|
|
|
|
# --- 5. derive per-host NVMe identity from the TPM certificate --------------
|
|
# Keeps the image fleet-generic: the host NQN is a function of the machine
|
|
# identity already proven via 802.1X, not a baked-in value.
|
|
if [ ! -s /etc/nvme/hostnqn ]; then
|
|
mkdir -p /etc/nvme
|
|
SERIAL=$(openssl x509 -in /run/dot1x/client.pem -serial -noout \
|
|
| cut -d= -f2 | tr 'A-F' 'a-f')
|
|
# Adjust the NQN domain/date to your org's convention (must match the
|
|
# allow-list on the nvmet target if host filtering is enabled).
|
|
echo "nqn.2026-06.org.example.fleet:host-${SERIAL}" > /etc/nvme/hostnqn
|
|
# Stable hostid derived from the same serial (UUID-shaped)
|
|
printf '%s' "$SERIAL" | sha256sum | cut -c1-32 \
|
|
| sed 's/\(.\{8\}\)\(.\{4\}\)\(.\{4\}\)\(.\{4\}\)\(.\{12\}\).*/\1-\2-\3-\4-\5/' \
|
|
> /etc/nvme/hostid
|
|
info "dot1x-macsec: hostnqn $(cat /etc/nvme/hostnqn)"
|
|
fi
|
|
|
|
: > "$STAMP"
|
|
exit 0
|