Initial commit

2026-06-12 01:46:29 +00:00
commit d383655875
21 changed files with 1557 additions and 0 deletions
@@ -0,0 +1,113 @@
+#!/bin/bash
+# dot1x-macsec-up.sh — initqueue/settled hook.
+# Order of operations is load-bearing:
+#   1. pull client cert from TPM NV into /run
+#   2. start wpa_supplicant (argv[0]=@wpa_supplicant => survives switch-root)
+#   3. wait for EAP success + macsec0
+#   4. DHCP on macsec0 (the pre-auth lease, if any, is invalid post-auth/VLAN)
+#   5. derive hostnqn/hostid from the cert so dracut's nvmf module can
+#      connect the NVMe/TCP root namespace over macsec0
+# Idempotent: guarded by a stamp file because initqueue may re-run hooks.
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+STAMP=/run/dot1x/.done
+[ -e "$STAMP" ] && exit 0
+mkdir -p /run/dot1x /run/wpa_supplicant
+
+# --- knobs (override on the kernel cmdline) ---------------------------------
+NIC=$(getarg rd.dot1x.if=)
+# shellcheck disable=SC2010  # /sys/class/net names are kernel ifnames; ls|grep is safe here
+[ -n "$NIC" ] || NIC=$(ls /sys/class/net | grep -vE '^(lo|macsec)' | head -1)
+NVINDEX=$(getarg rd.dot1x.nvindex=); [ -n "$NVINDEX" ] || NVINDEX=0x01800001
+TIMEOUT=$(getarg rd.dot1x.timeout=); [ -n "$TIMEOUT" ] || TIMEOUT=60
+
+info "dot1x-macsec: using interface $NIC, NV index $NVINDEX"
+
+# --- 0. TEMPORARY test bypass (rd.dot1x=0) ----------------------------------
+# Disables 802.1X + MACsec so the UKI / rootfs / NVMe-oF boot path can be
+# validated on an OPEN switch port before the auth layer is brought online.
+# The physical NIC is brought up with DHCP directly and dracut's cmdline-driven
+# nvmf module connects the root namespace over it — there is no macsec0, no
+# supplicant, no TPM cert read. The rest of the boot (rd.nvmf.discover, verity,
+# rootovl) is unchanged because it is driven by the kernel cmdline, not by this
+# hook. SECURITY: no link authentication or encryption in this mode — lab/test
+# networks only. Remove rd.dot1x=0 from the cmdline to restore full security.
+if [ "$(getarg rd.dot1x=)" = "0" ]; then
+    warn "dot1x-macsec: 802.1X/MACsec DISABLED (rd.dot1x=0) — TEST MODE, no link security"
+    ip link set "$NIC" up
+    # Plain DHCP on the physical NIC via network-legacy (mirrors how the secure
+    # path addresses macsec0); satisfies rd.neednet for the nvmf module.
+    ifup "$NIC"
+    # Static test NVMe identity (the secure path derives this from the TPM
+    # cert). Match these on the nvmet target if it filters by host NQN.
+    if [ ! -s /etc/nvme/hostnqn ]; then
+        mkdir -p /etc/nvme
+        echo "nqn.2026-06.org.example.fleet:test-host"   > /etc/nvme/hostnqn
+        echo "11111111-1111-1111-1111-111111111111"      > /etc/nvme/hostid
+        info "dot1x-macsec: test hostnqn $(cat /etc/nvme/hostnqn)"
+    fi
+    : > "$STAMP"
+    exit 0
+fi
+
+# --- 1. client certificate out of TPM NV ------------------------------------
+if [ ! -s /run/dot1x/client.pem ]; then
+    if ! tpm2_nvread -T device:/dev/tpmrm0 "$NVINDEX" -o /run/dot1x/client.der; then
+        warn "dot1x-macsec: tpm2_nvread failed — cannot authenticate"
+        exit 1
+    fi
+    openssl x509 -inform DER -in /run/dot1x/client.der -out /run/dot1x/client.pem
+fi
+
+# --- 2. supplicant as a root storage daemon ---------------------------------
+ip link set "$NIC" up
+if [ ! -e /run/dot1x/wpa.pid ]; then
+    # bash exec -a sets argv[0]; '@' prefix tells systemd's switch-root
+    # killing spree to spare this process (root storage daemon convention).
+    setsid bash -c "exec -a @wpa_supplicant /usr/sbin/wpa_supplicant \
+        -Dmacsec_linux -i $NIC \
+        -c /etc/dot1x/wpa_supplicant-dot1x.conf \
+        -P /run/dot1x/wpa.pid" &
+fi
+
+# --- 3. wait for authentication + macsec0 -----------------------------------
+i=0
+while [ "$i" -lt "$TIMEOUT" ]; do
+    if wpa_cli -p /run/wpa_supplicant -i "$NIC" status 2>/dev/null \
+            | grep -q '^suppPortStatus=Authorized' \
+       && ip link show macsec0 >/dev/null 2>&1; then
+        break
+    fi
+    sleep 1; i=$((i + 1))
+done
+if [ "$i" -ge "$TIMEOUT" ]; then
+    warn "dot1x-macsec: authentication / MACsec timeout after ${TIMEOUT}s"
+    exit 1
+fi
+info "dot1x-macsec: port authorized, macsec0 up after ${i}s"
+
+# --- 4. address the secure interface; netroot rides on macsec0 --------------
+ip link set macsec0 up
+# Hand macsec0 to dracut's network stack for DHCP + netroot resolution
+ifup macsec0
+
+# --- 5. derive per-host NVMe identity from the TPM certificate --------------
+# Keeps the image fleet-generic: the host NQN is a function of the machine
+# identity already proven via 802.1X, not a baked-in value.
+if [ ! -s /etc/nvme/hostnqn ]; then
+    mkdir -p /etc/nvme
+    SERIAL=$(openssl x509 -in /run/dot1x/client.pem -serial -noout \
+                 | cut -d= -f2 | tr 'A-F' 'a-f')
+    # Adjust the NQN domain/date to your org's convention (must match the
+    # allow-list on the nvmet target if host filtering is enabled).
+    echo "nqn.2026-06.org.example.fleet:host-${SERIAL}" > /etc/nvme/hostnqn
+    # Stable hostid derived from the same serial (UUID-shaped)
+    printf '%s' "$SERIAL" | sha256sum | cut -c1-32 \
+        | sed 's/\(.\{8\}\)\(.\{4\}\)\(.\{4\}\)\(.\{4\}\)\(.\{12\}\).*/\1-\2-\3-\4-\5/' \
+        > /etc/nvme/hostid
+    info "dot1x-macsec: hostnqn $(cat /etc/nvme/hostnqn)"
+fi
+
+: > "$STAMP"
+exit 0