Fix missing online hook

docs/TODO.md

@@ -143,10 +143,14 @@ boot LAN.
     `/etc/nvme/discovery.conf` correctly, but `initqueue/online/` is **empty** —
     no autoconnect hook is registered, so `nvme connect-all` is never run (no
     attempt in dmesg) and the namespace never appears. Drivers load and
-    `/dev/nvme-fabrics` exists; only the connect trigger is missing. **Fixed:**
+    `/dev/nvme-fabrics` exists; only the connect trigger is missing. A job
-    `dot1x-macsec-up.sh` (rd.dot1x=0 branch) now parses the discover address and
+    placed on the *main* initqueue from a settled hook gets registered but is
-    queues `nvme connect-all` on the initqueue itself (retries until the
+    **never re-executed** once the loop blocks on udev events (verified: job
-    namespace shows up). **⚠ The secure path has the same dependency on the
+    present, manual `connect-all` works, namespace stays absent). **Fixed:** a
+    dedicated `initqueue/online` hook (`nvmf-connect.sh`, installed via
+    `inst_hook initqueue/online 90`) runs `nvme connect-all` when network-legacy
+    sources online hooks on DHCP-bound — the event-driven trigger the nvmf
+    module omits. **⚠ The secure path has the same dependency on the
     (absent) nvmf autoconnect** — when 802.1X is re-enabled, the macsec0 path
     must likewise drive `connect-all` (or the network-manager port #1 must wire
     a working autoconnect). Currently only the test path is fixed.

files/dracut/95dot1x-macsec/dot1x-macsec-up.sh

@@ -59,25 +59,12 @@ if [ "$(getarg rd.dot1x=)" = "0" ]; then
         info "dot1x-macsec: test hostnqn $(cat /etc/nvme/hostnqn)"
     fi
 
-    # Drive the NVMe-oF connect ourselves. This distro's dracut `nvmf` module
+    # The NVMe-oF connect is driven by the initqueue/online hook
-    # parses rd.nvmf.discover into /etc/nvme/discovery.conf but registers NO
+    # (nvmf-connect.sh), which fires when the ip=dhcp link comes online — the
-    # initqueue/online autoconnect hook (that hook dir is empty), so
+    # correct event-driven place. (A job queued on the MAIN initqueue from here
-    # `nvme connect-all` is never run, the root namespace never appears, and the
+    # is registered but never re-executed once the loop blocks on events, so it
-    # boot spins on /dev/mapper/root forever. Queue connect-all on the main
+    # never connected; and this distro's nvmf module registers no online
-    # initqueue so it retries each loop until the namespace shows up (the link
+    # autoconnect of its own.)
-    # is already up via ip=dhcp; connect-all is idempotent once connected).
-    _disc=$(getarg rd.nvmf.discover=)        # e.g. tcp,192.168.50.10,4420
-    if [ -n "$_disc" ]; then
-        _trtype=${_disc%%,*}                 # tcp
-        _rest=${_disc#*,}                    # 192.168.50.10,4420
-        _traddr=${_rest%%,*}                 # 192.168.50.10
-        _trsvcid=${_rest##*,}                # 4420
-        info "dot1x-macsec: queueing nvme connect-all ${_trtype}/${_traddr}/${_trsvcid}"
-        /sbin/initqueue --unique --name nvmf-connect-all \
-            nvme connect-all -t "$_trtype" -a "$_traddr" -s "$_trsvcid"
-    else
-        warn "dot1x-macsec: rd.nvmf.discover not set — cannot connect NVMe root"
-    fi
     : > "$STAMP"
     exit 0
 fi

files/dracut/95dot1x-macsec/module-setup.sh

@@ -42,5 +42,10 @@ install() {
     # Hook: runs from the initqueue once the NIC exists, before netroot
     inst_hook initqueue/settled 30 "$moddir/dot1x-macsec-up.sh"
 
+    # Test-mode (rd.dot1x=0) NVMe-oF connect, driven event-wise on link-up.
+    # This distro's nvmf module registers no autoconnect, and a main-initqueue
+    # job isn't re-run once the loop waits on events — so connect here instead.
+    inst_hook initqueue/online 90 "$moddir/nvmf-connect.sh"
+
     dracut_need_initqueue
 }

files/dracut/95dot1x-macsec/nvmf-connect.sh

@@ -0,0 +1,42 @@
+#!/bin/bash
+# nvmf-connect.sh — initqueue/online hook (fires when a NIC comes online).
+#
+# TEST MODE ONLY (rd.dot1x=0): drive the NVMe-oF root connect here.
+# This distro's dracut `nvmf` module parses rd.nvmf.discover into
+# /etc/nvme/discovery.conf but registers NO autoconnect hook (initqueue/online/
+# ships empty), and a job placed on the MAIN initqueue is not re-executed once
+# the loop blocks waiting on udev events — so `nvme connect-all` otherwise never
+# runs, the root namespace never appears, and boot spins on /dev/mapper/root
+# forever. initqueue/online is the correct, event-driven place: network-legacy
+# sources these hooks once DHCP is bound, so the link is guaranteed up here.
+# Idempotent via a stamp; connect-all is itself safe to re-run, and on failure
+# we leave the stamp unset so the next online event retries.
+#
+# The secure path (rd.dot1x unset/!=0) connects over macsec0 from its own flow
+# in dot1x-macsec-up.sh and must NOT connect over the physical link here.
+
+type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
+
+[ "$(getarg rd.dot1x=)" = "0" ] || exit 0
+[ -e /run/dot1x/.nvmf-connected ] && exit 0
+
+_disc=$(getarg rd.nvmf.discover=)        # e.g. tcp,192.168.50.10,4420
+[ -n "$_disc" ] || { warn "nvmf-connect: rd.nvmf.discover not set"; exit 0; }
+_trtype=${_disc%%,*}
+_rest=${_disc#*,}
+_traddr=${_rest%%,*}
+_trsvcid=${_rest##*,}
+
+# nvme_tcp is usually auto-loaded, but ensure it so connect-all can't fail on a
+# missing /dev/nvme-fabrics.
+modprobe nvme_tcp 2>/dev/null
+
+info "nvmf-connect: nvme connect-all ${_trtype}/${_traddr}/${_trsvcid}"
+if nvme connect-all -t "$_trtype" -a "$_traddr" -s "$_trsvcid"; then
+    mkdir -p /run/dot1x
+    : > /run/dot1x/.nvmf-connected
+    info "nvmf-connect: connected — namespace + by-id link should appear shortly"
+else
+    warn "nvmf-connect: connect-all failed; will retry on next online event"
+fi
+exit 0

serving/.env.example

@@ -1,7 +1,7 @@
 # Copy to .env and edit for your test LAN/bridge, then: docker compose up -d
 
 # Release being served. Must match the Packer build (fleet-<version>.efi).
-IMAGE_VERSION=0.0.0-9841455
+IMAGE_VERSION=0.0.0-a508dce
 
 # OCI release-artifact image (built by scripts/build-oci.sh). Mounted directly
 # as a Docker image volume — the default artifact source. Pin by digest in
@@ -10,7 +10,7 @@ OCI_IMAGE=git.bitasylum.org/audiobuzz/fleet-boot
 
 # Fallback only (Docker < 28 / offline): local Packer output dir, used by the
 # commented bind-mounts in docker-compose.yml. Ignored when image volumes work.
-ARTIFACT_SRC=../artifacts/0.0.0-9841455
+ARTIFACT_SRC=../artifacts/0.0.0-a508dce
 
 # SPDK NVMe/TCP target image — prebuilt + pushed by CI
 # (.gitea/workflows/spdk-image.yaml); the serving host just pulls it.