Fix missing online hook

docs/TODO.md

@@ -143,10 +143,14 @@ boot LAN.
     `/etc/nvme/discovery.conf` correctly, but `initqueue/online/` is **empty** —
     no autoconnect hook is registered, so `nvme connect-all` is never run (no
     attempt in dmesg) and the namespace never appears. Drivers load and
-    `/dev/nvme-fabrics` exists; only the connect trigger is missing. **Fixed:**
-    `dot1x-macsec-up.sh` (rd.dot1x=0 branch) now parses the discover address and
-    queues `nvme connect-all` on the initqueue itself (retries until the
-    namespace shows up). **⚠ The secure path has the same dependency on the
+    `/dev/nvme-fabrics` exists; only the connect trigger is missing. A job
+    placed on the *main* initqueue from a settled hook gets registered but is
+    **never re-executed** once the loop blocks on udev events (verified: job
+    present, manual `connect-all` works, namespace stays absent). **Fixed:** a
+    dedicated `initqueue/online` hook (`nvmf-connect.sh`, installed via
+    `inst_hook initqueue/online 90`) runs `nvme connect-all` when network-legacy
+    sources online hooks on DHCP-bound — the event-driven trigger the nvmf
+    module omits. **⚠ The secure path has the same dependency on the
     (absent) nvmf autoconnect** — when 802.1X is re-enabled, the macsec0 path
     must likewise drive `connect-all` (or the network-manager port #1 must wire
     a working autoconnect). Currently only the test path is fixed.